[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Testing New Electrical Installation
- To: <ukha_d@xxxxxxx>
- Subject: RE: Testing New Electrical Installation
- From: "Steve Gordon" <steve@xxxxxxx>
- Date: Sun, 15 Jul 2001 04:05:45 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
We do have such tests to carry out on new electrical installations.
We would generally use a Meggar type insulation tester to ensure that the
insulation on all the conductors is in tact and not allowing
voltage/current
t pass to other conductors.
As a meggar generates a high charge it would not be advisable to leave X-10
devices in circuit whilst testing. This is also true of other descrete
electronic devices such as timers and the like.
HTH
Steve
-----Original Message-----
From: bdorset@xxxxxxx [mailto:bdorset@xxxxxxx]
Sent: 15 July 2001 03:59
To: ukha_d@xxxxxxx
Subject: [ukha_d] Testing New Electrical Installation
In England,Do you have t do an electrical installation test after a
new installation? If so , is such test carried out using a Megger
Ohmsmeter.
The key question is thou: Should you perform such test on an
installation with X-10 fixtures installed?
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject t http://docs.yahoo.com/info/terms/
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject t http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|