[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Automating PC via X10
- To: ukha_d@xxxxxxx
- Subject: Re: Automating PC via X10
- From: "K. C. Li" <li@xxxxxxx>
- Date: Mon, 9 Jul 2001 09:52:17 +0100 (BST)
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
On Mon, 9 Jul 2001, Paul Gordon wrote:
> Replace the switch with a powerflash module, or run a powerflash
module in
> parallel with the existing switch if you want t retain local control.
> Alternatively, if you have Homevision/Comfort or similar with relay
outputs,
> just use one of those t dothe contact closure.
Just one correction there. The X-10 module should be a Universal Module,
not Powerflash. The Universal Module will close a dry relay contact on
receiving the appropriate X-10 signal. The Powerflash will SEND an X-10
signal on closure of the contacts on the appropriate mode of operation.
Regards,
Kwong Li
li@xxxxxxx
Laser Business Systems Ltd.
http://www.laser.com
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject t http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|