[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Clipsal+LD11 (two way lights)
- To: ukha_d <ukha_d@xxxxxxx>
- Subject: RE: Clipsal+LD11 (two way lights)
- From: Keith Doxey <ukha@xxxxxxx>
- Date: Mon, 2 Jul 2001 10:29:29 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Wire then EXACTLY as you d for a single switch.
Just put the two or more in Parallel.
Keith
-----Original Message-----
From: Clive Dilley [mailto:clive@xxxxxxx]
Sent: 02 July 2001 10:03
To: 'ukha_d@xxxxxxx'
Subject: [ukha_d] Clipsal+LD11 (two way lights)
I am in the process of changing most of my lights to be controlled by a
LD11 and activated by a Clipsal 30MBPR switch.
This has been very successful, until I tried t tackle an existing two-way
circuit. I tried a few different wiring combinations, but could not get it
t work correctly.
Has anyone done this? How d I wire t two Clipsal switches? Each switch
has 4 terminals marked: 1 2 C LOOP
The diagrams on COMFORT did not really help that much (maybe I am just
stupid??)
Any help would be appreciated
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject t http://docs.yahoo.com/info/terms/
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject t http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|