The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Scart Resend, soldering iron ready, Help Please!


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Scart Resend, soldering iron ready, Help Please!
  • From: "Phillip Harris" <phillip.harris1@xxxxxxx>
  • Date: Mon, 22 Jan 2001 22:35:50 -0000
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

 
It should have no effect whatsoever but if you have a multimeter just ensure that there is 0v and negligable resistance between any of the grounds and the PC's case ... you should be fine to common the grounds however it could set up earth loops or other nasties if there is voltage or resistance there (which there shouldn't be but you never know).
 
Phil
-----Original Message-----
From: Campbell [mailto:c.macd@xxxxxxx]
Sent: 22 January 2001 21:43
To: ukha_d@xxxxxxxSubject: [ukha_d] Scart Resend, soldering iron ready, Help Please!

I am using phono out from the Matrox for video and from the soundcard for the sound left and right to put video from pc and dvd in pc through the house. What effect if any, will commoning the grounds have :
i.e. connecting scart
pin 4 audio out ground
pin 17 video ground and
pin 21 common ground together
 
thanks
 Campbell
 
If the whole world smiles
is it a Universal Beam :-)


eGroups Sponsor
Choose 3 DVDs for $0.49 each!
Choose 3 DVDs for $0.49 each!

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.