[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: ePOD Development
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: ePOD Development
- From: "Jon Whiten" <jon@xxxxxxx>
- Date: Mon, 15 Jan 2001 19:10:25 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Well,
>From my quick trials this evening, I can confirm that the Embedded
Toolkit
works for H/PC Pro, Palm-Size PC and Pocket PC only. It flatly refuses to
talk to my WinCE2.0 H/PC. Simple "Hello World" complies and
downloads to
the Pocket PC though.
Also, none of the remote tools will talk to CE2.0.
Anybody any ideas on how to re-configure this to work? I see no real
reason
other than bloody-mindedness on the part of MS so far as to why it is
limited to only the above 3 platforms.
Regards,
Jon
+--------------Personal------------+----------Work-----------+
Jon Whiten Church Gresley D.G. Controls Limited
Derbyshire Beacon Lamp Specialists
jon@xxxxxxx England mail@xxxxxxx
http://www.whiten.co.uk/
http://www.deegee.com
+----------------------------------+-------------------------+
-----Original Message-----
From: andy.powell@xxxxxxx [mailto:andy.powell@xxxxxxx]
Sent: 15 January 2001 14:56
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Re: ePOD Development
Which part of the Embedded tools are people looking at using - I've just
had a quick look at the VB bit and spotted a potential problem for anyone
thinking of using this. Looking under TOOLS>REMOTE TOOLS>CONFIGURE
PLATFORM MANAGER you find a list of available devices/types. You should
see HPC, Pocket PC and Palm Device listed. Don't expand the lists but
double click on one of the main devices eg Pocket PC. You'll get a list of
supported target processors. I've tried all three and MIPS is not listed
under any of them.
A.
Home |
Main Index |
Thread Index
|