The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Wireless LAN


  • To: ukha_d@xxxxxxx
  • Subject: RE: Wireless LAN
  • From: andy.powell@xxxxxxx
  • Date: Mon, 15 Jan 2001 14:39:56 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Sorry,

I thought you just wanted to connect the Gateway to a hub with your other
PCs.. didn't realize that you were going to use the modem too..

A.






"Timothy Morris" <timothy.morris@xxxxxxx>
15/01/2001 14:22
Please respond to ukha_d


To:     <ukha_d@xxxxxxx>
cc:
Subject:        RE: [ukha_d] Wireless LAN

Yes, but it doesn't say that you can use the modem to access the Internet
AND the Ethernet interface to route to the local network. In order to
understand that you need to find out how the internal routing tables are
set
up, and I couldn't find that out.


-----Original Message-----
From: andy.powell@xxxxxxx [mailto:andy.powell@xxxxxxx]
Sent: 15 January 2001 13:10
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Wireless LAN

I looked at the tech specs for it :

under Built in Modem/interface it lists:

Telephone Modem 56k V.90 RJ45
Ethernet Interface 10base-T RJ45
Wireless Interface IEEE 802.11b

A.






"Timothy Morris" <timothy.morris@xxxxxxx>
15/01/2001 12:10
Please respond to ukha_d


To:     <ukha_d@xxxxxxx>
cc:
Subject:        RE: [ukha_d] Wireless LAN

I looked at them too, and it wasn't clear though whether the Ethernet port
was just for connection to a cable modem, or could be used for routing
between two LANs; wireless and fixed. There was no detailed manual
available
for download, only a quick start guide. It does look incredibly cheap
compared anything else that is out there, so I would be careful.

Tim.

-----Original Message-----
From: andy.powell@xxxxxxx [mailto:andy.powell@xxxxxxx]
Sent: 15 January 2001 10:38
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Wireless LAN

I've just looked at the tech specs for this and it says it does support
NAT

A.





"Ray Barnett" <Barnett_Ray@xxxxxxx>
14/01/2001 13:40
Please respond to ukha_d


To:     ukha_d@xxxxxxx
cc:
Subject:        [ukha_d] Wireless LAN

The only thing
I'm unsure about now is whether the fact that the AP performs NAT
address translation means I can or can't see the rest of my network?










*********************** DISCLAIMER **************************
This message is intended only for use by the person
to whom it is addressed. It may contain information
that is privileged and confidential. Its content does
not constitute a formal commitment by Lombard Odier.
If you are not the intended recipient of this message,
kindly notify the sender immediately and destroy this
message. Thank you.
*************************************************************























Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.