[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: IR Tx & Rx boards ready a la Nigel's circuit
- To: <ukha_d@xxxxxxx>
- Subject: RE: IR Tx & Rx boards ready a la Nigel's
circuit
- From: "Ian B" <I.Bird@xxxxxxx>
- Date: Thu, 11 Jan 2001 09:56:27 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Robert, Graham
I will be delighted to send you out boards as requested. Would you like
boards or a kit inc. all parts except the TSOP (which comes from Keith). I
have now spoken to James who kindly built the all in one prototype board
and
have made some small corrections. It worked though which was great.
I am also working on plugs similar to those into modems to further reduce
size. I hope to have something at the end of the weekend. I chose these as
the crimping tool was less than six pounds making it economical. They are 4
position 4 contact ones but I use a total of 7 across two plugs. This means
the LED bits can be pluged in separately, I hope anyway.
Nothing is going to happen until the end of the weekend as I am away with
my
daughter.
Thanks
Ian
Home |
Main Index |
Thread Index
|