The UK Home Automation Archive

Archive Home

Group Home

Search Archive
Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Projectors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Cat 5 keyboard and mouse extension

To: <ukha_d@xxxxxxx>
Subject: Re: Cat 5 keyboard and mouse extension
From: "Ian Lowe" <ian@xxxxxxx>
Date: Wed, 3 Jan 2001 23:30:58 -0000
Delivered-to: rich@xxxxxxx
Delivered-to: mailing list ukha_d@xxxxxxx
Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
References: <004301c075d9$61be7a40$b2a07ad5@xxxxxxx>
Reply-to: ukha_d@xxxxxxx

Feasible, and works well.

I have been able to run a PS/2 keyboard over thirty metres of CAT-5, and a
mouse reliably over about twenty.

make sure you keep the cables twists tight, and solder very cleanly on the
PS2 plugs, and you will be fine.

Ian.

References:
- Cat 5 keyboard and mouse extension
  - From: "Campbell" <c.macd@xxxxxxx>

Prev by Date: Cat 5 keyboard and mouse extension
Next by Date: RE: NTL Cable Modem
Previous by thread: Cat 5 keyboard and mouse extension
Next by thread: RE: Cat 5 keyboard and mouse extension
Index(es):
- Date
- Thread

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.