[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: LM12W - X10 Lamp controler.
- To: ukha_d@xxxxxxx
- Subject: RE: LM12W - X10 Lamp controler.
- From: nigel@xxxxxxx
- Date: Wed, 03 Jan 2001 18:16:17 -0000 (GMT)
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
On 03-Jan-2001 Phillip Harris wrote:
> Why can't you just cut a hole in the ceiling big enough to tuck an
> LD10
> through into the ceiling void and then use a lamp with a larger
> baseplate to
> cover the hole?
Mainly because existing lighting positions are usually directly under
a joist, to give the ceiling rose something to screw into. If you
take a ceiling rose down you'll probably find a joist behind most of
it. You don't want to take an LD10 sized notch out of the bottom
surface of a structural joist...
Nigel
Home |
Main Index |
Thread Index
|