The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: [EPODS] Development - FIXED!!!!


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Big disk - problems - (long-ish)


  • To: ukha_d@xxxxxxx
  • Subject: Re: Big disk - problems - (long-ish)
  • From: "Paul Gordon" <paul_gordon@xxxxxxx>
  • Date: Tue, 02 Jan 2001 16:58:39 -0000
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

>Just out of interest are any of these machines multiprocessor??
>
>

Not this particular one. However, my main server is running on an ABIT BP6
with 2 x Celeron 533's, and this also has the HPT366 controller.

The main disks in that machine are Wide-SCSI, but since big IDE disks are
som much cheaper that their wide-SCSI equivalents, I also put in a 20GB
ATA-66 drive on the HPT366. While it all "works", this machine
does freeze
on a reasonably regular basis, which I also attribute to the HPT366.

Basically, I agree that these Highpoint controllers are CR*P, and don't
want
anything more to do with them. I've ordered a Promise ATA-100 card from
Dabs, which I'll put in the Jukebox machine in the next few days (probably
at the weekend).

I'll let you know howI get on...

Paul G.


_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.






Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.