The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: AD10 DIN Appliance Modules


  • To: ukha_d@xxxxxxx
  • Subject: RE: AD10 DIN Appliance Modules
  • From: "K. C. Li" <li@xxxxxxx>
  • Date: Tue, 2 Jan 2001 23:10:41 +0000 (GMT)
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

> I see the price on your site ... any further details available?

Well, it comes with a one-page instruction sheet. Basically, there are
four connections on the back of the unit. They are Live, Neutral, Up and
Down. Live and Neutral are the input 230V feed and the Up and Down are
230V output feeds. Obviously, the Up and Down connections are linked to
your respective motors.

On initial power-up, you have to calibrate the unit for the fully opened
and fully closed positions. Once it is done, the measured times for
opening and closing the shutter is stored in non-volatile memory.

Regarding the X-10 control of the unit:

OFF           - Shutter fully closed.
ON            - Shutter fully open.
DIM or BRIGHT - Shutter open by 50%.

Apparently, it also understands "Professional X-10". Probably
similar to
the LD11 for intermediate openings but no details are available.

Regards,

Kwong Li
li@xxxxxxx
Laser Business Systems Ltd.
http://www.laser.com






Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.