The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Big disk - problems - (long-ish)


  • To: ukha_d@xxxxxxx
  • Subject: Re: Big disk - problems - (long-ish)
  • From: andy.powell@xxxxxxx
  • Date: Tue, 2 Jan 2001 11:03:04 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Just out of interest are any of these machines multiprocessor??

A.







Vince <vince@xxxxxxx>
27/12/2000 00:21
Please respond to ukha_d

=20
To:     ukha_d@xxxxxxx
cc:=20
Subject:        Re: [ukha_d] Big disk - problems - (long-ish)

Paul, Ian,

The IRQL_LESS_THAN_EQUAL bluescreen crash has started happening now everyd
ay on my test W2K machine with a HPT370CR@P controller but on my BP6=20
machine (2 x 400CPU, W2K & all disks on the inbuilt HPT366) it never=20
happens. So it looks like I'll be getting a Promise ATA-100/66 controllerf
or my test machine!

Vince

At 19:05 23/12/00, you wrote:
>Paul, be very, very careful with that configuration.
>
>I have the SMP version of that motherboard in my server, and had
similar
>problems with the Highpoint Controller. I found that in addition to the
>IRQL_LESS_THAN_EQUAL bluescreen crash, the controller was corrupting=20
data.
>
>I had captured video, which suddenly started getting visible
glitches,=20
even
>though the initial capture was good. when I copied the data from the=20
server
>to my PC and back a few times, on each succesive copy, the video got=20
worse
>and worse, until it crashed VirtualDub outright.
>
>I now have a promise PCI controller card installed, and it has been=20
perfect
>from Day One.
>
>Personally, I think the HPT controllers are a pile of cr*p, and have
had
>tons of problems with friends PCs etc using them. My advice: spend
the=20
=A322
>on a Promise ATA-100/66 controller. It'll save much hair pulling and
>possibly a lot, lot worse......
>
>Ian.










*********************** DISCLAIMER **************************
This message is intended only for use by the person
to whom it is addressed. It may contain information
that is privileged and confidential. Its content does
not constitute a formal commitment by Lombard Odier.
If you are not the intended recipient of this message,
kindly notify the sender immediately and destroy this
message. Thank you.
*************************************************************





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.