[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: Automating curtains...
- To: ukha_d@xxxxxxx
- Subject: RE: Re: Automating curtains...
- From: "Paul Gordon" <paul_gordon@xxxxxxx>
- Date: Mon, 19 Feb 2001 13:01:36 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Errr... I was my local one, in Walthamstow...
Paul G.
>From: "Phil Harris" <phillip.harris1@xxxxxxx>
>Reply-To: ukha_d@xxxxxxx
>To: <ukha_d@xxxxxxx>
>Subject: RE: [ukha_d] Re: Automating curtains...
>Date: Mon, 19 Feb 2001 12:42:55 -0000
>
>Which Homebase is that?
>
>Phil
>
> > -----Original Message-----
> > From: Paul Gordon [mailto:paul_gordon@xxxxxxx]
> > Sent: 19 February 2001 12:34
> > To: ukha_d@xxxxxxx
> > Subject: RE: [ukha_d] Re: Automating curtains...
> >
> >
> > Also, I have from time to time spotted the occasional Swish
> > Autoglide units
> > on display in Homebase - I recently (about 3 weeks ago?) saw
> > the "Dusk to
> > Dawn" module, along with loads of track on sale in my local
> > one... - might
> > be worth checking out the big DIY sheds for any remaining
stock...
> >
> > Paul G.
> >
> >
> >
> > >From: "Phil Harris" <phillip.harris1@xxxxxxx>
> > >Reply-To: ukha_d@xxxxxxx
> > >To: <ukha_d@xxxxxxx>
> > >Subject: RE: [ukha_d] Re: Automating curtains...
> > >Date: Mon, 19 Feb 2001 12:07:09 -0000
> > >
> > >I'm going to regret this but...
> > >
> > >www.Laser.com still have four motors and various tracks left
> > (of the swish
> > >units) and www.letsautomate.com still have two. I was
> > thinking of buying
> > >all
> > >six as I have five windows that I want to do (and still have
> > a spare motor
> > >unit in case of a failure) however as I've just been made
> > redundant then
> > >spending probably close on a grand on automating some
> > curtains might not
> > >endear me to my missus!
> > >
> > >Phil
> > >
> > > > -----Original Message-----
> > > > From: Graham Howe [mailto:graham@xxxxxxx]
> > > > Sent: 19 February 2001 11:50
> > > > To: ukha_d@xxxxxxx
> > > > Subject: RE: [ukha_d] Re: Automating curtains...
> > > >
> > > >
> > > > I see that these are now $62 from the US supplier, but
there
> > > > are still the
> > > > concerns about the noise and the slipping with heavier
> > > > curtains. I must
> > > > admit that I am put off Ant's solution because of the
size of
> > > > the resulting
> > > > controller (not concerned about getting messy). I would
be
> > > > happy to even pay
> > > > the £100 for the CM80 if it was quiet, but with three
> > > > curtains in my lounge,
> > > > the resulting noise would not be appreciated. Surely
someone
> > > > is going to
> > > > start selling something sensible to fill the gap left
by Swish ?
> > > >
> > > > Graham
> > > >
> > > >
> > > > ------------------------ Yahoo! Groups Sponsor
> > > > ---------------------~-~>
> > > > eGroups is now Yahoo! Groups
> > > > Click here for more details
> > > > http://click.egroups.com/1/11231/1/_/2065/_/982583459/
> > > >
--------------------------------------------------------------
> > > > -------_->
> > > >
> > > >
> > > >
> > >
> > >
> >
> > ______________________________________________________________
> > ___________
> > Get Your Private, Free E-mail from MSN Hotmail at
>http://www.hotmail.com.
>
>
>
>
>
>
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Home |
Main Index |
Thread Index
|