[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: Automating curtains...
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: Automating curtains...
- From: "Phil Harris" <phillip.harris1@xxxxxxx>
- Date: Mon, 19 Feb 2001 12:07:09 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I'm going to regret this but...
www.Laser.com still have four motors and various tracks left (of the swish
units) and www.letsautomate.com still have two. I was thinking of buying
all
six as I have five windows that I want to do (and still have a spare motor
unit in case of a failure) however as I've just been made redundant then
spending probably close on a grand on automating some curtains might not
endear me to my missus!
Phil
> -----Original Message-----
> From: Graham Howe [mailto:graham@xxxxxxx]
> Sent: 19 February 2001 11:50
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Re: Automating curtains...
>
>
> I see that these are now $62 from the US supplier, but there
> are still the
> concerns about the noise and the slipping with heavier
> curtains. I must
> admit that I am put off Ant's solution because of the size of
> the resulting
> controller (not concerned about getting messy). I would be
> happy to even pay
> the £100 for the CM80 if it was quiet, but with three
> curtains in my lounge,
> the resulting noise would not be appreciated. Surely someone
> is going to
> start selling something sensible to fill the gap left by Swish ?
>
> Graham
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-~>
> eGroups is now Yahoo! Groups
> Click here for more details
> http://click.egroups.com/1/11231/1/_/2065/_/982583459/
> --------------------------------------------------------------
> -------_->
>
>
>
Home |
Main Index |
Thread Index
|