[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: FW: Macros, direct control, time based etc
- To: <ukha_d@xxxxxxx>
- Subject: RE: FW: Macros, direct control, time based etc
- From: "Phil Harris" <phillip.harris1@xxxxxxx>
- Date: Fri, 9 Feb 2001 16:57:57 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I use an "all housecode" IR->X10 transceiver (bought from
www.laser.com) and
control it from my Pronto ... that way I can activate macros and control
units directly.
Phil
> -----Original Message-----
> From: Nick Shore [mailto:nick.shore@xxxxxxx]
> Sent: 09 February 2001 16:44
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] FW: Macros, direct control, time based etc
>
>
>
> > I have assigned a housecode to each room of my house (plus one
> > for the loft
> > and one for outside), this has left me with four housecodes left
> > which I can
> > allocate to "macros".
> >
> And how do you control things, if I set my RF controller to the same
> housecode as
> the lamps then I can control the directly.
>
> If I set them it to the same as the macros then I can only
> trigger macros.
>
> Do you use different controllers for each ??
>
> Nick.
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-~>
> eGroups is now Yahoo! Groups
> Click here for more details
> http://click.egroups.com/1/11231/1/_/2065/_/981736992/
> --------------------------------------------------------------
> -------_->
>
>
>
Home |
Main Index |
Thread Index
|