The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: (OT) yahoo messenger breaking stuff..


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: (OT) yahoo messenger breaking stuff..
  • From: "Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>
  • Date: Sat, 29 Dec 2001 23:50:26 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Graham, do I understand this correctly, you run SBS on your server?
do you have the ATI AIW card in this machine?

B.

-----Original Message-----
From: Graham P. Howe [mailto:graham@xxxxxxx]
Sent: 29 December 2001 22:14
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] (OT) yahoo messenger breakin stuff..


I have the ATI AIW board on an XP machine, not W2K so I guess that is
why I have no problems. The TS that comes with XP is of course not the
same as the TS on W2K server which may also help. The mobo on my XP
machine is Abit KT7 btw.

In answer to your questions, I have a few laptops, the two that I have
used as TS clients are one fresh install of XP and one old NT4 desktop.
As I said the AIW is on my XP desktop (well midi tower actually) machine
and I have done a capture from broadcast (terrestrial) without any
problem, though it was only a single test capture of about 30 seconds.

I do plan to use show shifter on this machine, but have lots of other
stuff on the go at the moment and so have not got round to really trying
it out that much. I do have all the latest drivers installed, but I am
not familiar with the 'Crossbar' driver.

My server (the first genuine server on my LAN) is W2K SBS and is
absolutely fantastic, I really can't fault it at the moment, but as with
every machine I use, I did a complete rebuild when I installed it (I
have never had a fully successful upgrade of an operating system and
gave up trying some time ago).

Regards

Graham

> -----Original Message-----
> From: Ian Lowe [mailto:ian@xxxxxxx]
> Sent: 29 December 2001 21:28
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] (OT) yahoo messenger breakin stuff..
>
>
> Graham,
> The problem (I had this too) is with W2K TS Services, and it's the WDM
> Crossbar driver for the AIW card which causes the issue. If
> you have TS
> enabled, it disables the Crossbar, and you can't capture
> video. I had a
> ropey Mobo when I tried this in W2K Server, so a better AGP
> implementation
> may be okay..
>
> Would you mine checking a couple of things for me?
>
> Firstly, are you using a new XP specific driver on your
> laptop?, secondly,
> can you capture video okay?
>
> I had hoped I wouldn't have to take my server to XP, as W2K
> caused enough
> problems over NT4...
>


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.