The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Software project


  • To: ukha_d@xxxxxxx
  • Subject: Re: Software project
  • From: "Paul Gordon" <paul_gordon@xxxxxxx>
  • Date: Fri, 28 Dec 2001 18:45:11 +0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Steve, have a chat with Dan Hoenen over on the ACE list, - the ACE software
does exactly what you are describing, I believe....

Paul G.

>
>By way of an exercise, I thought I'd have a go at writing a Remote
Serial
>Port device driver - initially for Windows 2000/XP but potentially
98/ME
>using the Windows Driver Model.
>
>The idea is that you install a virtual device driver on your machine
that
>appears as a regular COM port but the physical port is located on
another
>machine on the network. A corresponding server component will provide
the
>other end of the 'software serial cable'. This would allow, for
example,
>HomeSeer to use a CM12 that was physically attached to another PC.
>
>Has anybody got any experience with writing such device drivers? Any
useful
>info to share?
>
>Cheers,
>Steve
>




Paul G.




_________________________________________________________________

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.