The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: [OT] Wacky!


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: OT - Phone Plugs


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: OT - Phone Plugs
  • From: "Dan Khan" <dhk@xxxxxxx>
  • Date: Mon, 10 Dec 2001 12:17:35 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Thanks for the help guys - my amp turned up today so you have probably
saved
me buying a new subwoofer!

I'll get some audio interconnects and use the amp pre-out to sub input.

Thanks,
-Dan

-----Original Message-----
From: Graham P. Howe [mailto:graham@xxxxxxx]
Sent: 10 December 2001 12:11
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] OT - Phone Plugs


If amp has a power cable it is active and needs line level
(non-amplified) signal from the sub pre-out on your main amp. This
connection should not be made with speaker wire. I used the same
interconnect cable I had for my other components but bought a 17m run
off the reel to get all the way round from my amp to my subs.

Graham

> -----Original Message-----
> From: Dan Khan [mailto:dhk@xxxxxxx]
> Sent: 10 December 2001 12:01
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] OT - Phone Plugs
>
>
> I'm not sure -
>
> I intended to take the amp SW out into wall plate, then down
> speaker cable to sub input...but now I am not sure.
>
> The sub does have it's own power cable so I guess it is
> active - what signal should I be taking from the amp to the
> sub then?  Do I need to take the sub pre-out from the amp instead?
>
> BTW: What is line-level exactly - the amplified or
> non-amplified signal?
>
> -Dan (Subwoofer Thicky)
>
>
> -----Original Message-----
> From: Steve Morgan [mailto:steve@xxxxxxx]
> Sent: 10 December 2001 11:06
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] OT - Phone Plugs
>
>
> Woah, hang on a mo!
>
> It sounds like this is an active subwoofer with a line-level
> input. Are you pushing an amplified signal to it from another
> amp? If so, you're gonna blow the sucker up! Or are you just
> using speaker cable for the line-level signal.
>
> Steve
>
> -----Original Message-----
> From: Dan Khan [mailto:dhk@xxxxxxx]
> Sent: 10 December 2001 10:15
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] OT - Phone Plugs
>
>
> Thanks, but I didn't explain myself well enough - I have
> speaker cable that terminates at a wall plate already - the
> other end of the cable runs under the carpet to the subwoofer
> location.  This end of the cable is bare wire and I need it
> to be a male phono plug.  This end just pokes up out of the
> carpet and needs to feed directly into the sub without having
> to install a new wall plate.
>
> Any ideas?
>
> Regards,
> -Dan
>
>
>
> -----Original Message-----
> From: James Hoye [mailto:james.hoye@xxxxxxx]
> Sent: 10 December 2001 10:06
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] OT - Phone Plugs
>
>
> > After installing all of my speaker cabling terminating in
> wall plates,
> > I have run one for the subwoofer under the carpet.  Fair
> enough, but
> > the subwoofer has a phono input not binding posts to
> attache the bare
> > wire - oops!.
> >
> > Anyone know where I can get a screw on phono plug to terminate
the
> > bare cable?  I have tried m*plin, RS, and other UK sites listed
in
> > google with no success.
>
> If you're handy with a drill and soldering iron, then for a
> couple of quid you too can build the following:
>
> http://www.home-automation.info/images/phono_faceplate_front.JPG
> http://www.home-automation.info/images/phono_faceplate_back.JPG
>
> See 'tutorial' at
> http://www.home-automation.info/make_speaker_terminal_wallplates.htm
>
> James H
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
> For more information:
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
> For more information:
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~--> Quit now for Great American
> Smokeout http://us.click.yahoo.com/0vN8tD/9pSDAA/ySSFAA/IBOolB/TM
> --------------------------------------------------------------
> -------~->
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.