The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: OT - Phone Plugs


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: OT - Phone Plugs
  • From: "Steve Morgan" <steve@xxxxxxx>
  • Date: Mon, 10 Dec 2001 11:05:40 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Woah, hang on a mo!

It sounds like this is an active subwoofer with a line-level input. Are you
pushing an amplified signal to it from another amp? If so, you're gonna
blow
the sucker up! Or are you just using speaker cable for the line-level
signal.

Steve

-----Original Message-----
From: Dan Khan [mailto:dhk@xxxxxxx]
Sent: 10 December 2001 10:15
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] OT - Phone Plugs


Thanks, but I didn't explain myself well enough - I have speaker cable that
terminates at a wall plate already - the other end of the cable runs under
the carpet to the subwoofer location.  This end of the cable is bare wire
and I need it to be a male phono plug.  This end just pokes up out of the
carpet and needs to feed directly into the sub without having to install a
new wall plate.

Any ideas?

Regards,
-Dan



-----Original Message-----
From: James Hoye [mailto:james.hoye@xxxxxxx]
Sent: 10 December 2001 10:06
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] OT - Phone Plugs


> After installing all of my speaker cabling terminating in wall plates,
I
> have run one for the subwoofer under the carpet.  Fair enough, but the
> subwoofer has a phono input not binding posts to attache the bare wire
-
> oops!.
>
> Anyone know where I can get a screw on phono plug to terminate the
bare
> cable?  I have tried m*plin, RS, and other UK sites listed in
> google with no
> success.

If you're handy with a drill and soldering iron, then for a couple of quid
you too can build the following:

http://www.home-automation.info/images/phono_faceplate_front.JPG
http://www.home-automation.info/images/phono_faceplate_back.JPG

See 'tutorial' at
http://www.home-automation.info/make_speaker_terminal_wallplates.htm

James H



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.