The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Anyone know anything about Fujitsu LCD Screens ?


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: OT: Optical and coaxial digital outputs for PCM, Dolby Digital, DTS and MPEG


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: OT: Optical and coaxial digital outputs for PCM, Dolby Digital, DTS and MPEG
  • From: "Phil Harris" <phillip.harris1@xxxxxxx>
  • Date: Fri, 14 Dec 2001 09:07:33 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Title: Message
I'll get stoned for saying this but use the coax digital connections as optical cables don't work if they get "nipped" and if you're only running a couple of meters between the DVD player and amp then you can use just an ordinary phono-phono lead. (I challenge anyone on this group to be reliably able to tell the difference between an audio lead and a "digital" cable over a metre or two.)
 
Sony's Sky box supports digital audio out on an optical connector IIRC...
 
Phil
-----Original Message-----
From: Steven Dickson [mailto:sdickson@xxxxxxx]
Sent: 14 December 2001 08:55
To: 'ukha_d@xxxxxxx'
Subject: [ukha_d] OT: Optical and coaxial digital outputs for PCM, Dolby Digital, DTS and MPEG

Would one of you home cinema buffs be able to tell me what sort of cable I need to connect my DVD player to a home cinema amp. 
 
Both units are JVC and have both the optical and 'phono' type coaxial connections on the back.  The amp/controller can be configured to accept either or, as far as I know my sky box doesn't support this (I know sky are trialing some DD at the moment, but my box only has stereo out 'phono' style sockets that I presume wont have the correct encoded bits), it's the pace unit.  So what would be my best option to use for the DVD player - optical or coax, and where night one get the correct cable/s -would I be correct in assuming that an ordinary unshielded wired one will be 'bad'.
 
Thanks,
 
Steve
 
BTW anybody over this side of the pond wanting a Psion Wavefinder - PCworld in Sprucfield have about a dozen left - Thanks, Michael.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
ADVERTISEMENT
See the Trailer!

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.