[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: LW11G ??
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: LW11G ??
- From: "Phil Harris" <phillip.harris1@xxxxxxx>
- Date: Mon, 17 Dec 2001 13:16:07 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
> And do the screw holes on the face plate match?
Yes ... The screw holes line up perfectly with all of the wall boxes
I've tried which are a 47mm deep surface box, a 35mm deep dry lining box
and a 47mm deep metal backbox. You need 35mm for the unit to mount with
about 5mm behind it.
25mm backboxes can be used with the backs cut out...
> Basically, is this a screw in replacement? (once, of course,
> you get a neutral feed sorted)
In so far as you need a neutral then yes ... It is physically
compatible.
Phil
Home |
Main Index |
Thread Index
|