[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Controllers for Dallas 1-wire network
Wouldnt a TINI board suit your needs? http://www.ibutton.com/TINI
Use the TINI board as a 1-wire bus master and use its serial port
functionality to send signals to your PC.
Thanks
kieran
-----Original Message-----
From: Andrew Richards [mailto:andrew.richards@xxxxxxx]
Sent: Tuesday, December 11, 2001 9:18 AM
To: ukha_d@xxxxxxx
Subject: [ukha_d] Controllers for Dallas 1-wire network
Can anyone point me at controllers that can supervise a 1-wire bus with
lots
of open/close sensors on it - I'm looking for a 'box' that will poll sensor
state every 250mS and trigger an interupt on a PC serial or parallel port
on
change of state. I've had a look at the Dallas site, but can't find
anything specific.
Best regards
Andrew
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|