[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Re: DDAR, ARF ARF 2...[Answer]
- To: <ukha_d@xxxxxxx>
- Subject: Re: Re: DDAR, ARF ARF 2...[Answer]
- From: "Shmern" <shmern@xxxxxxx>
- Date: Fri, 24 Aug 2001 22:29:22 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- References: <9m6daj+aghf@xxxxxxx>
- Reply-to: ukha_d@xxxxxxx
Ok I can confirm that the receiver.arf is loaded on boot up, BUT you HAVE
to
cold boot the DDAR, i.e. take the power lead out and press power button ,
then put power lead in again and boot it.
Basically you need to get the DELL Initialising screen up again.
I tried my 4Mb modified receiver.arf, but it would not load it, I S%$t
myself and put the original receiver.arf back in the dir and cold booted
again and it worked... PHEW !!!
So to recap, can someone (Andy?) make a modified receiver.arf and upload it
too the files section or email it too me to try ?
Thanks
Darren
----- Original Message -----
From: "Richard Lockyer" <richard.lockyer@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Friday, August 24, 2001 9:26 PM
Subject: [ukha_d] Re: DDAR, ARF ARF 2...[Answer]
> --- In ukha_d@y..., "Andy Powell" <ukha@b...> wrote:
> >
> > No receiver.arf??!!! The DDAR software I downloaded puts a
> > receiver.arf in the ARM software dir??!!
> >
> > Andy
>
> In the latest version 1.03 (from Graham) the file is called
> receiver.arf, in version 1.01 shipped with the units it is called
> mercury.arf
>
> If you rename the file and cycle the power (not the button on the
> front, Doh!) it says music server not found.
>
> Richard
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe: ukha_d-subscribe@xxxxxxx
> Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> List owner: ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Home |
Main Index |
Thread Index
|