The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: DDAR, ARF ARF 2...[Answer]



I got a windows version of Tar and re-Tarred the files, but... the
resultant
file is 3.9 Mb !!!! the original was 1.8Mb So I don't want to use it !!!!

What is the implication of putting a duff file as the receiver.arf , if you
replace it with the original one will all be well again ?

i.e. does the DDAR pull this file down EVERYtime ?

D.
----- Original Message -----
From: "Andy Powell" <ukha@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Friday, August 24, 2001 6:28 PM
Subject: Re: [ukha_d] Re: DDAR, ARF ARF 2...[Answer]


> Mmm..I didn't appear to have a problem... Which " DOS naming
issue when
re-tarring"
>
> Andy
>
>
> *********** REPLY SEPARATOR  ***********
>
> On 24/08/01 at 17:20 Justin wrote:
>
> >Andy,
> >how do you get around the DOS naming issue when re-tarring?
> >Justin
> >
> >----- Original Message -----
> >From: Andy Powell <ukha@xxxxxxx>
> >To: <ukha_d@xxxxxxx>
> >Sent: Friday, August 24, 2001 2:22 PM
> >Subject: [ukha_d] Re: DDAR, ARF ARF 2...[Answer]
> >
> >
> >> Ok,
> >>
> >> so no one knew or cares :-( ... but I think I've managed it
(although
> >> can't test the final result just yet.. anyhow here are the
steps I've
> >> performed so far:
> >>
> >> Tools needed: WinRAR, tar (msdos)
> >>
> >> 1. Use WinRAR un uncompress the receiver.diff.arf.gz file
> >> 2. Rename the resultant receiver.diff.arf file to
receiver.diff.TAR
> >> 3. Use WinRAR to uncompress the receiver.diff.TAR file
> >> 4. Backup (DO THIS PLEASE!!!) the receiver.arf file from the
DELL
> >> Audio Receiver directory
> >> 5. Rename the receiver.arf file to receiver.TAR
> >> 6. Use WinRAR to uncompress the receiver.diff.TAR file
> >> 7. Copy the files and direcotries from step 3 to where the
files from
> >> step 6 are.
> >> 8. Use TAR to recompress the files/dirs into a new archive
.eg.
> >> myreceiver.TAR
> >> 9. Rename the myreceiver.TAR file to receiver.arf
> >>
> >> [these folloing steps have not yet been performed by me
(waiting for
> >> DDAR arrival)
> >>
> >> 10. Reboot the DDAR.
> >> 11. Pray
> >> 12. If all goes well then use:
> >>
> >> http://<ip-address of receiver>/receiver.html
> >>
> >> from your PC and you should be able to control and view your
DDAR
> >> remotely. Use Terminal services and you could run it on your
> >> EPODS/Ipaq etc :-)))
> >>
> >> 13. If any problems occur after DDAR reboot you can replace
the newly
> >> created receiver.arf file with the original backed up
version.
> >>
> >>
> >> Andy
> >>
> >> --- In ukha_d@y..., "Andy Powell" <ukha@b...>
wrote:
> >> >
> >> > Ok,
> >> >
> >> > has anyone (under windows) installed the displayserver
hack? I've
> >> > read what little instructions there are and...well - I
haven't got
> >> a
> >> > clue.... has somone (using Linux) built the appropriate
.arf file??
> >> >
> >> > below is the text from the readme - as you can see it
assumes a
> >> lot -
> >> > like you know what he's talking about for a start!
> >> >
> >> > "This is displayserver for the rio receiver.
> >> > unzip the receiver.diff.arf.tgz file and add the files
to the
> >> > original receiver.arf file. Do not use winzip to do
this; device-
> >> > files contained in the arf file will be lost...
> >> > after installation open your webbrowser and point it to
:
> >> > http://<ip-address of receiver>/receiver.html
> >> > Enjoy..."
> >> >
> >> > Andy
> >>
> >>
> >>
> >> For more information: http://www.automatedhome.co.uk
> >> Post message: ukha_d@xxxxxxx
> >> Subscribe:  ukha_d-subscribe@xxxxxxx
> >> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> >> List owner:  ukha_d-owner@xxxxxxx
> >>
> >> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >>
> >>
> >>
> >
> >
> >
> >
> >For more information: http://www.automatedhome.co.uk
> >Post message: ukha_d@xxxxxxx
> >Subscribe:  ukha_d-subscribe@xxxxxxx
> >Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> >List owner:  ukha_d-owner@xxxxxxx
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
> --- Tag-it! v2.0 (c) Andy Powell ,1998,1999,2000...and beyond..
>
> Where are the pedestrian crossings on the Information Superhighway?!
>
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.