The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: RE:Epod & networks


  • To: ukha_d@xxxxxxx
  • Subject: Re: RE:Epod & networks
  • From: patrickl@xxxxxxx
  • Date: Fri, 24 Aug 2001 16:10:01 -0000
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

--- In ukha_d@y..., Mike Griffiths <mike@a...> wrote:
> I'm beginning to think the guy on the I-Appliance BBS notice board
was
> dreaming :(
>
> Mike

[snip]

> > Mustne my net work card
> > It's a XIRCOM CE3B 10/100
> > On the I-Appliance BBS notice board
> > It says they work
> > Software installs ok
> > And I can ping my other machines
> > But I cant find them any otherway
> >


If you can ping the card, then the network stack is running against
the card ok. Whatever problems you are having with browsing to the
EPOD is almost certainly unrelated to the network card IMO. When I
was fiddling with this, I found I could connect from the epod using
the command prompt and specifying IP addresses (eg. //192.168.0.8/c$)
to connect. Have you tried this? Are the EPODs in the same workgroup
as the rest of your machines?

Patrick



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.