|
|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
|
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Automating Node 0 door access...
- To: <ukha_d@xxxxxxx>
- Subject: RE: Automating Node 0 door access...
- From: "Keith Doxey" <ukha@xxxxxxx>
- Date: Sat, 18 Aug 2001 20:52:49 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
If you can only get a "Pull" solenoids why not connect it to a
lever to
convert it to push.
SOLENOID <--- pull
/
/
/
/ pivot at this point
/
/
/ ----> PUSH
Lever PUSHES door
Keith
> -----Original Message-----
> From: Gareth Cook/STA/Lotus [mailto:gcook@xxxxxxx]
> Sent: 18 August 2001 20:06
> To: ukha_d@xxxxxxx
> Cc: Alancc
> Subject: Re: [ukha_d] Automating Node 0 door access...
>
>
> I did - almost perfect except the solenoid was a pull type instead of
a
> push - could be awkward setting that up in the limited space...
>
> Any ideas yourself ?
>
> Thanks !
>
> G.
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|
|