[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: RE: (ukha_d) OTish: basic network question
- To: <ukha_d@xxxxxxx>
- Subject: RE: RE: (ukha_d) OTish: basic network question
- From: "Mark Harrison" <Mark.Harrison@xxxxxxx>
- Date: Thu, 16 Aug 2001 17:01:29 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Client version is a complete red herring.
It's version 3.1.0.0 in the same way, say, that, say the TCP/IP stack
you might have used in Windows 3.11 to connect to a SunOS 4.1.1 server
was Microsoft TCP/IP version 1.1 with a telnet 1.0 client.
The Server side of Novell WILL be higher than 3.1!
Mark Harrison
Head of Systems, eKingfisher
-----Original Message-----
From: peter.white@xxxxxxx [mailto:peter.white@xxxxxxx]
Sent: 16 August 2001 16:29
To: ukha_d@xxxxxxx
Subject: [ukha_d] RE: (ukha_d) OTish: basic network question
According to the properties, the client side of Novell is at v 3.1.0.0 -
the
server side may well be at a higher version, but I doubt it!
-----Original Message-----
From: MIME:paul_gordon@xxxxxxx at INTERNET
Sent: Thursday, August 16, 2001 02:07
To: White, Peter; ukha_d@xxxxxxx at Internet
Subject: RE: [ukha_d] OTish: basic network question
>normally by installing the microsoft network client, you get TCP/IP
>installed. 90% of the time Novell uses IPX
>
>From Netware 5 onwards (which has been out for about 2 years now...)
the
default protocol stack is TCP/IP....
Paul G.
_________________________________________________________________
Home |
Main Index |
Thread Index
|