[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: wireless kit for epod and ipaq whats the best?
- To: ukha_d@xxxxxxx
- Subject: RE: wireless kit for epod and ipaq whats the
best?
- From: Craig Callander <craig@xxxxxxx>
- Date: Tue, 14 Aug 2001 11:10:52 -0500
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Mick, one more thing, I saw this in the FAQ:
5. What is DMZ? And how many DMZ computers does the Barricade support?
Demilitarized Zone (DMZ) is a feature of firewall. It allows a set of
computers to be exposed to the Internet. Some applications require multiple
TCP/IP ports to be open. DMZ allows computers to be exposed for that
purpose. The Barricade supports one DMZ computer if you enable the feature.
This may help your 'underlying motive' , if all your non-NAT friendy apps
are on one PC?
Craig
-----Original Message-----
From: Mick Furlong [mailto:dorsai@xxxxxxx]
Sent: Tuesday, August 14, 2001 4:13 PM
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] wireless kit for epod and ipaq whats the best?
Craig
sounds good although it would be nice to have a single box that did all
these
things and supported port forwarding. This would give the best of all
worlds.
Just a question though are you sure it can be used in the way you suggest?
I have briefly scanned the user guide and it seems to assume it is working
in
NAT mode at all times, if it is and if it is allocating your PCs IP
addresses
in the private range then I don't think it is going to be too happy
coexisting with either an ethernet NAT or non-NAT ADSL connection.
All of the above could be garbage btw ;) and I have a underlying motive in
that I want to run a NAT hardware based firewall (with configurable port
forwarding) and a wireless network. When I first looked at this I had hoped
it would do both.
Cheers
Mick
Craig Callander <craig@xxxxxxx> said:
> If you dont want to use the firewall/NAT features, just connect your
> broadband connection to the 'home' side. Then use your favourite s/w
> firewall solution to protect your PC's.
>
> My recommendation was based on features, price and the fact the SMC
devices
> work on epods, 249.00 GBP for barricade + FREE pcmcia card.
>
> -----Original Message-----
> From: Mick Furlong [mailto:dorsai@xxxxxxx]
> Sent: Tuesday, August 14, 2001 3:05 PM
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] wireless kit for epod and ipaq whats the best?
>
>
> Just a little problem with the SMC barricade broadband, if I am
reading
this
>
> correctly it uses NAT, this means that certain things will not work on
> the 'home' side of the router.
>
> Among these are netmeeting, mirc dcc send, ftp servers and webservers
(I
> think it also screws some games).
>
> As far as I can tell there is no way to either turn this off or use
port
> forwarding to circumvent it.
>
> The thing that really bugs me is they are selling it as a firewall
feature
> and advertising it as a plus point! If you want to do any of the above
> things
> then you will need to connect the PC/PCs doing them before this device
> (which
> means you cannot do them over wireless).
>
> Fine for people who want to do nothing much but send email and browse
the
> web
> but how many of them will be broadband users?
>
> Mick
>
> Craig Callander <craig@xxxxxxx> said:
>
> > John
> >
> > You could use the SMC wireless cards, these are known to work
with the
> > epods. SMC have an offer on until the end of the month, if you
buy a
> > barricade wireless broadband router you can claim a free pcmcia
card,
see
> > www.smc.com
> >
> > Craig
> >
> > -----Original Message-----
> > From: Dr John Tankard [mailto:john@xxxxxxx]
> > Sent: Tuesday, August 14, 2001 10:41 AM
> > To: ukha_d@xxxxxxx
> > Subject: [ukha_d] wireless kit for epod and ipaq whats the best?
> >
> >
> > Hi
> >
> > I want to get some wireless kit for a ipaq and my epod, I want
the base
> > station to just plug into a switch rather than another slot used
up in
my
> > server. What should I go for ?
> >
> > IIRC the epod is a bit fussy on rf stuff
> >
> >
> > John
> >
> >
> >
> > For more information: http://www.automatedhome.co.uk
> <http://www.automatedhome.co.uk>
> > Post message: ukha_d@xxxxxxx
> > Subscribe: ukha_d-subscribe@xxxxxxx
> > Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> > List owner: ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> <http://docs.yahoo.com/info/terms/>
> >
> >
> > For more information: http://www.automatedhome.co.uk
> <http://www.automatedhome.co.uk>
> > Post message: ukha_d@xxxxxxx
> > Subscribe: ukha_d-subscribe@xxxxxxx
> > Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> > List owner: ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> <http://docs.yahoo.com/info/terms/>
> >
> >
> >
>
>
>
> --
>
>
>
>
>
> Yahoo! Groups Sponsor
>
>
<http://rd.yahoo.com/M=210156.1528652.3092242.1456760/D=egroupweb/S=17050419
>
92:HM/A=734183/R=0/*https://www.joincountryhomesandgardens.com/mybookclub/ga
>
rdening/bookclubs/chg/JoinFast/c2/c2_coupon.htm/?src=015_02_hd_273_139_1410>
>
>
>
<http://us.adserver.yahoo.com/l?M=210156.1528652.3092242.1456760/D=egroupmai
> l/S=1705041992:HM/A=734183/rand=831297974>
>
> For more information: http://www.automatedhome.co.uk
> <http://www.automatedhome.co.uk>
> Post message: ukha_d@xxxxxxx
> Subscribe: ukha_d-subscribe@xxxxxxx
> Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> List owner: ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> <http://docs.yahoo.com/info/terms/>
Service.
>
>
>
--
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|