[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Response cameras - composite out
- To: ukha_d@xxxxxxx
- Subject: Re: Response cameras - composite out
- From: patrickl@xxxxxxx
- Date: Tue, 14 Aug 2001 09:13:47 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Good to hear!
> Yesterday's info from Patrick saved me from giving up and going to
Homebase
> to buy a modulator today!
Oh, I had fun with them too. To get the Micromark modulator I got
from Homebase working, it was necessary to rewire the Response camera
plug in order to ground the SCART "Video In Gnd" (pin 17), which
is
unconnected in the cameras I have.
Very pleased with my modified PIR's though. I extracted the CCD
module from a bargain 9.99 b&w camera, and fitted it inside the case
of an existing PIR with just a discrete 3mm hole to enable it to see
it out visible from the outside. Draws power from the PIR, and uses a
spare core in the alarm cable to route the video back to node 0. A
blob of Blue Tack enables the camera to be aimed as required :)
Patrick
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|