[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Pronto & Cable
- To: <ukha_d@xxxxxxx>
- Subject: RE: Pronto & Cable
- From: "Graham Kiff" <graham.kiff@xxxxxxx>
- Date: Mon, 13 Aug 2001 19:46:51 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I am afriad not. The DiTV2000 uses IrDA instead of standard consumer IR.
I have exactly the same problem and have tried all sorts to resolve it.
Including the following:
Tried a RedRat2 IR device
Contacted Pace directly for any RS232 protocols
Upgraded my OneForAll5 to OFA6 (free of charge)
to see if the Pronto could learn from that
The only thing I haven't tried is using the IrDA connector available for
most motherboards - however it's seems quite dificult to get hold of,
especially one that is capable of Fast IrDA (ie. Up to 4Mb/s)
If you or anyone else on the list has any other ideas, they would be
greatly
appreciated.
Regards
Graham
-----Original Message-----
From: Stuart Whyte [mailto:stuart@xxxxxxx]
Sent: 13 August 2001 18:19
To: ukha_d@xxxxxxx
Subject: [ukha_d] Pronto & Cable
Gents, (& Jenni)
Does anyone know if a Pronto can be used with a Pace Di2000T Digital
cable box??
I suspect not, but remain hopeful!
Cheers
Stuart
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|