|
Hi all,
A request for help :-)
Yesterday I decided that I'd finally get
started on
putting CAT5 in walls, started off fine, ended with frustration. My
problem seems to stem from my inability to wire a Clipsal CAT5e connector,
I
wired up a length of CAT5 with an RJ45 connector at one end and the
clipsal
jobbie at the other, plugged my KAT 5 units in either end, managed to get
sound,
buzz and wobbly "picture". OK, lets attempt to fix
this step by
step I thought...
KAT5's are working fine, connected them with a
network cable; perfect picture and sound. So I decided to chop one end of the "known good" network cable off
and
wire it to the clipsal, again I get the same symptons buzz, sound and a
wobbly
picture. After some number of attempts to fix it and lacking a
working
internet connection, I gave up.
Can anyone offer words of advice? I
realise there are 8 strands of cable, so
there is
the likelyhood that I've got something wired incorrectly. The RJ45
connector is wired, from Pin 1:
White/Orange, Orange, White/Green, Blue,
White/Blue, Green, White/Brown, Brown
The Clipsal outlet is wired as per their
colour
coding on the back.
I'm a wee bit stumped, so any hints or tips
would
be greatly appreciated.
Thanks,
- Phil
| Yahoo! Groups
Sponsor |
;) |
|
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|