The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

LD module mounting


  • To: ukha_d@xxxxxxx
  • Subject: LD module mounting
  • From: "Paul Gordon" <paul_gordon@xxxxxxx>
  • Date: Tue, 07 Aug 2001 12:17:00 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Chaps, following the extensive refurbishment of my master bedroom, I have a
need to house several LD modules in the loft..

There will be 3 x LD11's plus 1 x AD10

I've looked at the enclosures on Letsautomate, - there are a couple of
small
ones which are only suitable for 1 or 2 modules, (not suitable then), so I
guess I need a full-size consumer unit to mount them in.

My question is this: is *any* standard consumer unit suitable? - and if so,
can anyone recommend the cheapest option available - this will be in the
loft, and it will only ever be housing these 4 modules...

Alternatively, is it possible to just buy the DIN rail on its own? - which
I
could then screw down to a back-board and snap the modules onto... (sorry,
was that too many periods?)

Cheers.

Paul G.




_________________________________________________________________

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.