[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Pronto CCF files
- To: <ukha_d@xxxxxxx>
- Subject: RE: Pronto CCF files
- From: "Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>
- Date: Fri, 3 Aug 2001 21:33:44 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Thanks for the offer(s) I am going to make a concerted effort to fix it
this
w/e, I'll keep you posted.
As for the sale bit, just kidding I WANT it to work 'cos I like it and I'm
fed up with the 10 other remotes laying around.
B.
> -----Original Message-----
> From: Ian B [mailto:Ian@xxxxxxx]
> Sent: 03 August 2001 08:55
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Pronto CCF files
>
>
> Why don't you mail the offending Pronto to either Phil or myself
> and we can
> try it on known good PC setup for you. If it still fails then its
second
> hand value may not be that good but at least you would know.
>
> Ian
>
>
> > -----Original Message-----
> > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > Sent: 02 August 2001 23:06
> > To: ukha_d@xxxxxxx
> > Subject: RE: [ukha_d] Pronto CCF files
> >
> >
> > OK so I give up.......
> >
> > I can still only load to the Pronto, not from the Pronto!
> >
> > Could not get the other PC to talk to the Pronto at all!
> >
> > Might try booting into W98 tomorrow and try again, maybe even
> try my other
> > W2K server.....
> >
> > Be good,
> >
> > B.
> >
> > PS anyone want to buy a used Pronto....;-)
> >
> > > -----Original Message-----
> > > From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> > > Sent: 01 August 2001 23:14
> > > To: ukha_d@xxxxxxx
> > > Subject: RE: [ukha_d] Pronto CCF files
> > >
> > >
> > > I'm now somewhat stuck ... Do you have a different PC that
you
> > could do a
> > > fresh install of ProntoEdit on?
> > >
> > > Phil
> > >
> > > > -----Original Message-----
> > > > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > > > Sent: 01 August 2001 21:36
> > > > To: ukha_d@xxxxxxx
> > > > Subject: RE: [ukha_d] Pronto CCF files
> > > >
> > > >
> > > > Hi Phil, sorry for the delay in replying, some of us
have to
> > work for a
> > > > living!
> > > >
> > > > Why do you want my backside down there? it's not a
pretty sight!:-)
> > > >
> > > > I have loads of copies of the ccf file, I always work
on a
> > > copy! don't we
> > > > all???
> > > >
> > > > The CCF will load to the pronto but not back to the PC,
even if
> > > I try and
> > > > load it immediately back to the PC.
> > > >
> > > > I am using ProntoEdit v1.05
> > > > Sys v4.7
> > > > App v4.86
> > > >
> > > > Just tried the reset button, nothing, hmmmmmmmmmmm
> > > >
> > > > Downloaded an old file into the pronto, that worked but
back
> > to the PC,
> > > > forget it.
> > > >
> > > > HELP........
> > > >
> > > > B.
> > > >
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> > > > > Sent: 01 August 2001 01:01
> > > > > To: ukha_d@xxxxxxx
> > > > > Subject: RE: [ukha_d] Pronto CCF files
> > > > >
> > > > >
> > > > > Get your backside in gear and add it to the list
so that you
> > > > bring it down
> > > > > with you when you come...
> > > > >
> > > > > *grin*
> > > > >
> > > > > You do have a recent copy of your Pronto CCF
right? Try hitting
> > > > the reset
> > > > > button on the underside of the Pronto and see if
that clears
> > > > the problem.
> > > > >
> > > > > Which direction is the error coming up? From the
Pronto to the
> > > > PC or from
> > > > > the PC to the Pronto? Could be firmware
differences, both my
> > > > Prontos have
> > > > > been flashed with the latest firmware (Sys V3.62
& App V4.85)
> > > > and if I try
> > > > > to use the original version of ProntoEdit (1.03 -
have tried
> > > > this tonight
> > > > > just for you Brian) then ProntoEdit on the PC will
not accept
> > > the upload
> > > > > from the Pronto however ProntoEdit V1.05 works
fine.
> > > > >
> > > > > Phil
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > > > > > Sent: 01 August 2001 00:05
> > > > > > To: ukha_d@xxxxxxx
> > > > > > Subject: RE: [ukha_d] Pronto CCF files
> > > > > >
> > > > > >
> > > > > > Nope, tried this with new Duracell's, noticed
an error was
> > > > > briefly showing
> > > > > > before ProntoEdit loaded, said something
about a macro.ccf file
> > > > > > or something
> > > > > > like that not valid then promptly loaded
anyway.
> > > > > >
> > > > > > I have re-installed ProntoEdit over the
original version and
> > > > > the error has
> > > > > > now gone but still will not load from the
Pronto.
> > > > > >
> > > > > > Ok, I have now downloaded a file from the PC
into the Pronto
> > > > > and tried to
> > > > > > up-load it back to the PC and same error!
> > > > > >
> > > > > > It looks like it can only move the data 1 way
i.e. to the
> > > pronto, most
> > > > > > strange.
> > > > > >
> > > > > > Any more suggestions?
> > > > > > Go to bed, give it to Phil and tell your wife
you just bought
> > > > it? commit
> > > > > > suicide now........
> > > > > >
> > > > > > B.
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ____________________________________
> > > > > Automated Home UK
> > > > > http://www.automatedhome.co.uk
> > > > > ____________________________________
> > > > >
> > > > > Post message: ukha_d@xxxxxxx
> > > > > Subscribe: ukha_d-subscribe@xxxxxxx
> > > > > Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> > > > > List owner: ukha_d-owner@xxxxxxx
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > >
> > >
> > >
> > >
> > > ____________________________________
> > > Automated Home UK
> > > http://www.automatedhome.co.uk
> > > ____________________________________
> > >
> > > Post message: ukha_d@xxxxxxx
> > > Subscribe: ukha_d-subscribe@xxxxxxx
> > > Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> > > List owner: ukha_d-owner@xxxxxxx
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> > >
> > >
> > >
> > > ____________________________________
> > > Automated Home UK
> > > http://www.automatedhome.co.uk
> > > ____________________________________
> > >
> > > Post message: ukha_d@xxxxxxx
> > > Subscribe: ukha_d-subscribe@xxxxxxx
> > > Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> > > List owner: ukha_d-owner@xxxxxxx
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
> >
> >
> > ____________________________________
> > Automated Home UK
> > http://www.automatedhome.co.uk
> > ____________________________________
> >
> > Post message: ukha_d@xxxxxxx
> > Subscribe: ukha_d-subscribe@xxxxxxx
> > Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> > List owner: ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|