[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Electric gate wiring?
- To: <ukha_d@xxxxxxx>
- Subject: RE: Electric gate wiring?
- From: "James Hoye" <james.hoye@xxxxxxx>
- Date: Fri, 3 Aug 2001 15:04:34 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
> Anyone know what wiring is typically required for electric gates?
>
> Want to put something before the drive goes in - I don't plan to
> electrify the gates (IYSWIM) immediately, but I still want to
pre-wire...
My best guess:
SWA - at least 4 core plus a couple of lengths of CAT5 for possible
control,
intercom etc. I guess :)
You may want some decorative/security lighting too in which case the other
SWA core could be used - think ahead.
Depending on the motor load and distance involved, 1.5mm^2 would be a
minimum CSA, with 2.5mm^2 being more useful. Of course if your drive if
500m then CAT5 might struggle over that distance :)
James H
Home |
Main Index |
Thread Index
|