The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: CD players



Title: RE: [ukha_d] CD players
Exactly my thoughts.
 
The reason I asked the question was after reading a review in a hifi mag in the dentist surgery, all sorts of claims were made for different digital interconnects both coax and optical, it all seamed a load of cobblers so why do the reviewers go along with it?.
 
I also run a Sony multi changer but into an Arcam Alpha 10 Dave, the difference between the digital connection using the Arcam DAC and the audio output from the Sony is dramatic even with good interconnects on the line output.
 
Alancc
----- Original Message -----
Sent: Thursday, August 02, 2001 1:12 AM
Subject: RE: [ukha_d] CD players

        I too wondered this - Am I right in believing that there is absolutely no error detection (or correction) available in an audio bitstream from a CD - is it not just a stream of analog sample values ?

        If so and assuming the 1's and 0's are decoded reliably then I am guessing that the differences come from the jitter (lock) and the edges of the serial data switching - I can see that a varying speed motor for example would cause problems but it would seem reasonable to expect that most 'fair' products should  be almost identical in performance once the a/d is done offboard - indeed I would expect it to be very difficult to pick out a top end player from a mid or even low one in a blind audio test - or am I missing something here ?
 
        I know putting my Sony CD multi-changers through the Tag McLaren AV32R has made them sound fantastic, previously one was just ok'ish and one was really awful - now I can't tell the difference.

        I really cannot believe that people can tell the difference between digital interconnects - analog maybe but the technical reasons just aren't there for digital - particularly optical. Maybe my hearing is just not up to it and I think that is Phil's point that at some stage the improvements , whilst technically there, are lost on the listener.

        Kevin


-----Original Message-----
From: Alan Cockerton [mailto:alancc@xxxxxxx]
Sent: 01 August 2001 20:16
To: ukha_d@xxxxxxxSubject: [ukha_d] CD players

 
A bit off topic but I know we have some audio buffs out there.
 
What difference does it make to the sound quality between using an expensive or cheap CD transport or interconnect lead assuming the AtoD conversion is being carried out in the amp, surly the data is digital,its ether there or not so how can it be changed by the hardware?
 
Alancc




--



____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor


____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.