The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: [OT] VHS to PC converter recommendations


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Scart switching on Nokia OD Box


  • To: ukha_d <ukha_d@xxxxxxx>
  • Subject: RE: Scart switching on Nokia OD Box
  • From: Keith Doxey <ukha@xxxxxxx>
  • Date: Thu, 2 Aug 2001 14:24:54 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx m
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx m
  • Reply-to: ukha_d@xxxxxxx

Title: Scart switching on Nokia OD Box
Have you proved with a voltmeter that there is no voltage on Pin 8?
 
Is there an option in the menus to disable SCART control?
 
Many TVs asign a priority to SCARTs and on my Mitsubishi if there is a Pin8 cative on AV1 it will totally ignore AV2 even if the TV has been manually changed t BBC1 etc.
 
More annoyingly, if the Digibox is turned on it will grab AV2. You then select BBC1 on the TV all is fine. If I then use my VCR that is on AV1 that grabs the TV which is what I want. When I stop the VCR, AV1 releases, but instead of dropping back t BBC1 that I was watching it now sees that Pin8 is high on AV2 and gives me the satellite.
 
Still, its better than the Phillips I uses to have, if something grabbed the SCART on that you couldnt override it :-(
 
Keith
-----Original Message-----
From: Kevin Hawkins [mailto:tivo@xxxxxxx]
Sent: 02 August 2001 13:25
To: ukha_d@xxxxxxxSubject: [ukha_d] Scart switching on Nokia OD Box

        On my Nokia OD Box there is a button on the remote t switch between TV and DTV. This works  by putting out a signal on the Scart connector to force the tv to AV in. Pin8 ?

        All my other products work fine this way - eg Tivo, Philips OD Box, Pace sat box etc. But not the Nokia. Pressing the button has no effect (even using the same scart cable as others). So I am guessing this has been disabled somehow and the switching signal is not being output. Is there any hidden menu to enable this or has someone hacked a wire off inside or perhaps the unit is faulty in this respect. Any ideas ?

        Kevin


--



____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject t the Yahoo! Terms of Service.

Yahoo! Groups Sponsor


____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject t the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.