[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Panel-mount CAT5 sockets?
- To: ukha_d@xxxxxxx
- Subject: RE: Panel-mount CAT5 sockets?
- From: "Paul Gordon" <paul_gordon@xxxxxxx>
- Date: Thu, 02 Aug 2001 14:06:17 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx m
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx m
- Reply-to: ukha_d@xxxxxxx
> >
>
>How are you connecting the DS18020s ont the cable ???
>
>when we made a wiring loom here we just soldered them across a pair in
a
>cat
>5
>cable, a bit messy, anyone done it better.
>
>I was thinking of a small box with a DS1820 mounted in it with an RJ45
>socket or
>two (for daisychaining)
>
>
At the moment, I'm just planning to solder them directly t the CAT5 cable,
and then ideally mount that in "something" - don't know what yet,
one thing
I thought of was to destroy some "Bic" biro's and have the DS1820
stuffed in
the end with just a little bit of the top of it poking out, - the legs,
solder joins & a few cm of the cable inside, secured with hot-glue...
(haven't tried it yet though...)
Paul G.
_________________________________________________________________
Home |
Main Index |
Thread Index
|