RE: MS13E help

[steve.crick@xxxxxxx]

Thanks for the help.

I have the MS13 set to send on/off at all times. I have Homeseer, but the
macro is not dawn/dusk aware yet.

The problem I had was that I was getting a trigger on the E11 macro (even
though the unit is set to E10). The device does see the light it controls,
so what stops the MS13 sending out this 'dusk' signal (I assume that is
what
the E11 code is for??)?

Cheers - Steve

-----Original Message-----
From: Paul Wootton [mailto:paulw@xxxxxxx]
Sent: 19 April 2001 08:34
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] MS13E help


It's not usual to get the daytime/dusk frequently; unless you're actually
sitting in a dim office/room.
Can the sensor see the light its controlling?   That'll really bugger you
up
- and that's why I don't use the dusk sensor on any of the (8) MS13's I
have
around the place - I just rely on homeseer's daytime/nightime settings.
-- Paul --


-----Original Message-----
From: steve.crick@xxxxxxx [mailto:steve.crick@xxxxxxx]
Sent: 19 April 2001 08:13
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] MS13E help


Cool, thanks Paul.

I was sure that was the daylight sensor. Dumb ha. A few words on the help
sheet would have helped.

I got the thing working now; is it normal for it to send odd codes?

I have it set to E10; but sometimes I get both E10 and E11 when it detects
movement (this causes two macros to fire). If this is normal 'odd'
behaviour; fine. If not, I guess I will need to return it.

Steve

-----Original Message-----
From: Paul Wootton [mailto:paulw@xxxxxxx]
Sent: 18 April 2001 19:59
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] MS13E help


There's a small clear plastic 'thing' on the front that looks like an o
with
a horizontal bar on it.   You need to lever this out with a fine
screwdriver
or a pin.   There's a single crosshead screw behind it that releases the
battery cover.
-- Paul --

-----Original Message-----
From: steve.crick@xxxxxxx [mailto:steve.crick@xxxxxxx]
Sent: 18 April 2001 19:55
To: ukha_d@xxxxxxx
Subject: [ukha_d] MS13E help


Ok; So I have just received my first MS13E.

The (less than useful) instructions say 'Remove the battery cover on the
front....'

HOW ? - I have tried pushing, pulling, sliding to the point that I think
something is going to break.

Anybody out there care to let me in on the secret of removing the cover?

Thanks - Steve


****************************************************************************
**********

This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender
immediately by telephoning +44(1252) 373232. You should not copy it or
use it for any purpose nor disclose or distribute its contents to any
other person.

****************************************************************************
**********




Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



---------------------------------------------------------------
Any views expressed in this message are those of the individual sender,
except where the sender specifically states them to be the views of IBNet
Plc.

This message contains confidential information and is intended only for the
individual named. If you are not the named addressee you should not
disseminate, distribute or copy this e-mail.  Please notify the sender
immediately by e-mail if you have received this e-mail by mistake and
delete
this e-mail from your system.

E-mail transmission cannot be guaranteed to be secure or error-free as
information could be intercepted, corrupted, lost, destroyed, arrive late
or
incomplete, or contain viruses. The sender therefore does not accept
liability for any errors or omissions in the contents of this message which
arise as a result of e-mail transmission. If verification is required
please
request a hard-copy version.





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



****************************************************************************
**********

This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender
immediately by telephoning +44(1252) 373232. You should not copy it or
use it for any purpose nor disclose or distribute its contents to any
other person.

****************************************************************************
**********




Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



---------------------------------------------------------------
Any views expressed in this message are those of the individual sender,
except where the sender specifically states them to be the views of IBNet
Plc.

This message contains confidential information and is intended only for the
individual named. If you are not the named addressee you should not
disseminate, distribute or copy this e-mail.  Please notify the sender
immediately by e-mail if you have received this e-mail by mistake and
delete
this e-mail from your system.

E-mail transmission cannot be guaranteed to be secure or error-free as
information could be intercepted, corrupted, lost, destroyed, arrive late
or
incomplete, or contain viruses. The sender therefore does not accept
liability for any errors or omissions in the contents of this message which
arise as a result of e-mail transmission. If verification is required
please
request a hard-copy version.





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



**************************************************************************************

This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender
immediately by telephoning +44(1252) 373232. You should not copy it or
use it for any purpose nor disclose or distribute its contents to any
other person.

**************************************************************************************