The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: SVideo Signal problem...


  • To: "'ukha_d@xxxxxxx'" <ukha_d@xxxxxxx>
  • Subject: RE: SVideo Signal problem...
  • From: Mark Harrison <Mark.Harrison@xxxxxxx>
  • Date: Tue, 17 Apr 2001 14:56:05 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Gareth,

I never solved the "looping between colour and B&W" problem.

However, I did solve the "Black and White only when you hit the
PAL/NTSC
button" problem.

I don't remember the details, and your TV's system menus will certainly
differ from mine, but the outline was that, somewhere deep in the TV setup
screen was a series of options about which flavours of PAL/NTSC to support
(I forget which, since this was a couple of years ago, and I've not touched
it since.) The trouble is that there are too many variants of, I think,
PAL.
The solution became obvious when the laserdisk swung into colour and stayed
there.

Hope this helps...



>  -----Original Message-----
> From: 	Gareth Cook/STA/Lotus [mailto:gcook@xxxxxxx]
> Sent:	17 April 2001 12:07
> To:	ukha_d@xxxxxxx
> Subject:	[ukha_d] SVideo Signal problem...
>
>  << Message:  >>


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.