|
|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
Latest message you have seen: RE: GU10 LED's
|
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Simple wiring question
- To: <ukha_d@xxxxxxx>
- Subject: Simple wiring question
- From: "Ian Wright" <ian.wright@xxxxxxx>
- Date: Fri, 2 Jun 2000 11:14:18 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I have quite a few plug in X10 modules but these are no good for my
lighting
ccts that are all wired directly or use 5 amp round pin plugs. I have used
a junction box for each cct and can re-wire from each box to a central CU
in
the loft (similar to last thread on CU).
How does the manual ON/OFF switch interface with the Din rail mounted in
the
CU.
Can I have the manaul swithc as well the X10 control (all switchs wired as
standard - live switched).
Ian
------------------------------------------------------------------------
Spending too much calling friends all over the world? Join beMANY!
and pay less each month.
http://click.egroups.com/1/4259/7/_/2065/_/959940769/
------------------------------------------------------------------------
Home |
Main Index |
Thread Index
|
|