The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: LM12W - X10 Lamp controler.


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: LM12W - X10 Lamp controler.
  • From: "Jon Whiten" <jon@xxxxxxx>
  • Date: Thu, 28 Dec 2000 23:59:14 -0000
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I may be wrong, and usually am, but from the .pdf files, it would seem to
be
an LM12U plug-in without the plug/socket but with flying leads.

Having said that, how do you switch them off locally?  The LM12Us I have
only respond to switching on, and switching the lamp on/off to switch on is
not my kind of fun.

The PDF is rather inconsistent in my mind (see snippet below) but I would
guess that it is indeed nothing more than an LM12 without any sockets and
as
such, to my mind, not really practical for day to day use.

>>>>>>
"The Lamp Module Wired is a 300W receiver unit that works as a remote
dimmer.
The connected lamp can still be switched on and off locally. The dimmer
function, however, is an X-10 remote
control. The lamp module can be used at any wall outlet in the house with
incandescent lamps between 60W
and 300W.
The LM12W is a small module that can be fitted easily in any false ceiling,
wall, etc. to control in a very esthetic
way. Just set the wheels on the front side to the desired device address
(e.g. F9) and note this address down in
a list.
The lamp connected to the Lamp Module Wired can still be controlled locally
by its own switch, but do not forget
to leave the local switch in the "ON" position, as other wise the
lamp can
not be controlled by an
X-10 controller. Switch the lamp off by remote control.
The LM12W responds to "standard" X-10 that is: "all lights
on" or "all units
off" from any controller set to its
house code regardless of unit code or alternatively individual unit control
by "ON", "OFF", "Bright" and
"Dim"."
>>>>>>>>>>>


Regards,

Jon
+--------------Personal------------+----------Work-----------+
Jon Whiten        Church Gresley   D.G. Controls Limited
Derbyshire  Beacon Lamp Specialists
jon@xxxxxxx         England      mail@xxxxxxx
http://www.whiten.co.uk/          
http://www.deegee.com
+----------------------------------+-------------------------+



-----Original Message-----
From: Stuart Grimshaw [mailto:stuart@xxxxxxx]
Sent: 28 December 2000 18:59
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] LM12W - X10 Lamp controler.


The LM12W's can be seen at
http://www.intellihome.be/categories.asp?cat=x10modules

They're sort of a cross between LM12U's and a LW10U, in that they're Lamp
unit's but they don't plug into the wall sockets.

On 2000.12.28 18:07:44 +0000 Jon Whiten wrote:
> What's an LM12W?
>


-------------------------- eGroups Sponsor -------------------------~-~>
eGroups eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9698/1/_/2065/_/978048085/
---------------------------------------------------------------------_->





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.