[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Source of cheap Hex crimp tools
- To: ukha_d <ukha_d@xxxxxxx>
- Subject: RE: Source of cheap Hex crimp tools
- From: Keith Doxey <keith.doxey@xxxxxxx>
- Date: Wed, 20 Dec 2000 15:36:21 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Sometimes the simple solutions are easily overlooked :-)
Been there, done that, got the T-shirt
Keith
> -----Original Message-----
> From: Timothy Morris [mailto:mail@xxxxxxx]
> Sent: 20 December 2000 14:36
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Source of cheap Hex crimp tools
>
>
> I hadn't actually thought of that. I might see if I can order
> the connectors
> with a length of cable already crimped.....
>
>
> Tim.
>
> > -----Original Message-----
> > From: Keith Doxey [mailto:keith.doxey@xxxxxxx]
> > Sent: 20 December 2000 14:23
> > To: ukha_d
> > Subject: RE: [ukha_d] Source of cheap Hex crimp tools
> >
> >
> > If the lead is totally portable...
> > i.e. not threaded through a hole in the wall or window frame then
> > I suggest
> > asking one of the local Security or Satellite installers if they
> > could crimp
> > it on for you. A bit inconvienient I know, but they would at
> > least have the
> > proper tooling.
> >
> > It needs a lot of compression to properly crimp those connectors
> > and even if
> > you found a "cheap" tool it may not do a very good job
of
> the crimping.
> >
> > Keith
> >
> > > -----Original Message-----
> > > From: Timothy Morris [mailto:mail@xxxxxxx]
> > > Sent: 20 December 2000 14:09
> > > To: Ukha_D@Egroups. Com
> > > Subject: [ukha_d] Source of cheap Hex crimp tools
> > >
> > >
> > > I've finally found a source of reverse thread connectors for
> > > Wireless LAN
> > > antennae. The next problem is that they are only available
in
> > > crimp and not
> > > clamp form. As I am only ever likely to use a crimp tool
> > > twice I don't want
> > > to spend a fortune, can anyone point me in the direction of
a
> > > cheap source
> > > of these tools - it is for crimping a BNC style plug onto
> RG58 cable?
> > >
> > > Tim.
> > >
> > >
> > > -------------------------- eGroups Sponsor
> > > -------------------------~-~>
> > > eLerts
> > > It's Easy. It's Fun. Best of All, it's Free!
> > > http://click.egroups.com/1/9699/1/_/2065/_/977321229/
> > >
--------------------------------------------------------------
> > > -------_->
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
>
>
> -------------------------- eGroups Sponsor
> -------------------------~-~>
> eLerts
> It's Easy. It's Fun. Best of All, it's Free!
> http://click.egroups.com/1/9699/1/_/2065/_/977322864/
> --------------------------------------------------------------
> -------_->
>
>
>
>
-------------------------- eGroups Sponsor -------------------------~-~>
eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9699/1/_/2065/_/977326661/
---------------------------------------------------------------------_->
Home |
Main Index |
Thread Index
|