[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Consumer Untis
- To: <ukha_d@xxxxxxx>
- Subject: RE: Consumer Untis
- From: "Phil Harris" <phillip.harris1@xxxxxxx>
- Date: Tue, 5 Dec 2000 17:13:23 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Can you get the modules to feed from the bus bars that are part of the
enclosure when used as consumer units or do you have to hard wire each
module?
Phil
-----Original Message-----
From: Mark McCall [mailto:mark@xxxxxxx]
Sent: 05 December 2000 17:09
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Consumer Untis
> Mark - from your snaps I see you used MEM...
To be honest I just took what the spark gave me Michael.
I think he was going for the cheapest he could find because there were so
many. I have changed one module out myself (changing an LD10 for an LD11)
and it was a simple process. There's a little tag on top of the module
that
pulls up the clips and releases them from the "top-hat" shaped
bar at the
back of the consumer unit.
M.
-------------------------- eGroups Sponsor -------------------------~-~>
eGroups eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9698/1/_/2065/_/976036390/
---------------------------------------------------------------------_->
Home |
Main Index |
Thread Index
|