[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Nigel's IR Transmitter - a beginners tale (longish)
- To: <ukha_d@xxxxxxx>
- Subject: RE: Nigel's IR Transmitter - a beginners tale
(longish)
- From: "Graham Howe" <graham@xxxxxxx>
- Date: Thu, 9 Nov 2000 13:54:25 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
You are correct, blobs are joins, T junctions are also joins and yes, the
bottom left is complicated ! Remember link from pin 8 to 12V is required
and
D1 (visible LED) connects to 0V not 12V (make sure it is correctly oriented
as well). Good luck, I am just starting soldering now.
Regards
Graham
-------------------------- eGroups Sponsor -------------------------~-~>
Receive 500 minutes of Personal Conferencing FREE.
Go to Sprintbiz.com.
http://click.egroups.com/1/9786/3/_/2065/_/973777691/
---------------------------------------------------------------------_->
Home |
Main Index |
Thread Index
|