[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: PR511 Dual Floodlight X10 Motion Sensor
- To: ukha_d@xxxxxxx
- Subject: Re: PR511 Dual Floodlight X10 Motion Sensor
- From: "K. C. Li" <li@xxxxxxx>
- Date: Wed, 16 Aug 2000 12:35:53 +0100 (BST)
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
On Wed, 16 Aug 2000, Michael Mc Aree wrote:
> The manual states that "DO not connect the Black (live) to a
switched Live
> as from a wall switch. The PHS01 (PR511) requires uninterrupted power
at all
> times" but it also has an insert that says "WARNING: To
prevent severe
> damage to the motion detector, DO NOT operate this unit from a dimmer
or any
> kind of remote controlled wall switch module".
It simply warns you NOT to connect the Dual Floodlight Motion Detector to
a dimming unit (eg. LW10U, LM12U), controlling the PHS01/PR511 from any
X-10 controller is fine. The warning is stating the obvious. The same
connection warning would apply to TV, fridge, air con, etc.
Regards,
Kwong Li
li@xxxxxxx
Laser Business Systems Ltd.
http://www.laser.com
--------------------------------------------------------------------<e-
Missing old school friends? Find them here:
http://click.egroups.com/1/8015/9/_/2065/_/966425652/
--------------------------------------------------------------------e>-
Home |
Main Index |
Thread Index
|