[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: X10 RF PIR - battery cover
- To: <ukha_d@xxxxxxx>
- Subject: RE: X10 RF PIR - battery cover
- From: "Ian" <Ian.Bird@xxxxxxx>
- Date: Wed, 9 Aug 2000 10:18:06 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
There is a little clear plastic bit in the middle of the front of the unit.
Pull this out with your nails or long nosed pliers and there is a screw
under it. From there on it pops off with a little shove towards the bottom.
I had the same experience and mine looks a little worse for wear after I
eventually found my way in.
Ian
-----Original Message-----
From: Stuart Johnson [mailto:stuart@xxxxxxx]
Sent: 09 August 2000 09:54
To: ukha_d@xxxxxxx
Subject: [ukha_d] X10 RF PIR - battery cover
I recently purchased a X10 RF PIR (MS13E). Silly question - How do you
get
the battery cover off? I have tried to carefully prise it off with a
screwdriver, but it doesn't want to budge. Don't want to force anything in
case it brakes.
Stuat
www.stu.org.uk (home page)
--------------------------------------------------------------------<e-
Special Offer-Earn 300 Points from MyPoints.com for trying @Backup
Get automatic protection and access to your important computer files.
Install today:
http://click.egroups.com/1/6347/9/_/2065/_/965812676/
--------------------------------------------------------------------e>-
Home |
Main Index |
Thread Index
|