|
|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
Latest message you have seen: Converting Dry Contact t X10
|
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Extra serial ports
- To: <ukha_d@xxxxxxx>
- Subject: RE: Extra serial ports
- From: "Mark McCall" <mark@xxxxxxx>
- Date: Fri, 4 Aug 2000 10:45:38 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
>I take it you have already checked TBO (The ****ding Obvious!)
TBO???
>- Disable the parallel port if your not using it (free's IRQ 7)
Already done that.
>- Disable any unused ATA controller channels (may free IRQ 13 or 14)
If I'm not using the second IDE channel can I disable this then??
>- Enable IRQ steering if your PCI cards support it to allow all
>PCI cards to
>share 1 single IRQ (which I think is usually IRQ 11??)
It's an ISA card :-(
>- Do you REALLY need a soundcard in a server?
I had to take out the sound card to get the one serial port to work!
>- Are there any ISA cards you could upgrade to PCI ones? this
>may free up an
>IRQ if the new PCI card can share as mentioned above...
>
>Sorry if I'm teaching you to suck eggs here!
Thanks
M.
--------------------------------------------------------------------<e-
Shop? Read? Go to the movies? Clean the Bathroom? What would you
rather do? Ourhouse.com wants you to WIN A MAID for a year....
http://click.egroups.com/1/7017/9/_/2065/_/965382409/
--------------------------------------------------------------------e>-
Home |
Main Index |
Thread Index
|
|