The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Parallel Cables





Paul Gordon wrote:
>
> Also, how could you run a parallel device over CAT5? - CAT5 only has 8
> cores, and parallel cables have either 25 or 36. - Not all are used of
> course, but I believe you ALWAYS need more than 8, as there are a
minimum of
> 8 required for the data bits, plus "some more" for timing
& sync signals
> etc...

AIUI, he wants to drive an LCD at the remote end, from a PC parallel
port, so he's not strictly sending parallel data, just using a couple of
the conductors.

ant
--
ant@xxxxxxx                     /\/\                www.ant.org
ant@xxxxxxx            (`')     www.homewireless.co.uk
()
Megawatt Winged Avenger


--------------------------------------------------------------------<e-
Get a NextCard Visa, in 30 seconds!
1. Fill in the brief application
2. Receive approval decision within 30 seconds
3. Get rates as low as 2.9% Intro or 9.9% Fixed APR
http://click.egroups.com/1/6631/9/_/2065/_/965063486/
--------------------------------------------------------------------e>-





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.