The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: OT: Emergency - catflap fitting - how ??


  • To: ukha_d@xxxxxxx
  • Subject: Re: OT: Emergency - catflap fitting - how ??
  • From: "Neil J. McRae" <neil@xxxxxxx>
  • Date: Mon, 31 Jul 2000 10:32:29 +0100 (BST)
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx


Note that you cannot do this with safety glass it will shatter into
a million peices. I used a Glazier and had a new peice of glass installed
with the hole already cut. Although this ended up being smashed by the cat!
We then put in a peice of matching white PVC with the catflap in the bottom
half of the door. [ This was recommended to us by another glazier ].

Regards,
Neil.

> Hi there,
>
> I believe that you can even buy a circular glass cutter - try B+Q . it
has a
> suction cup in the center with a metal arm with the cutter on that
runs
> round the center. The diameter is adjustable
>
> regards
>
> Alex
> ----- Original Message -----
> From: "Nick Shore" <nick.shore@xxxxxxx>
> To: <ukha_d@xxxxxxx>
> Sent: Monday, July 31, 2000 10:08 AM
> Subject: RE: [ukha_d] OT: Emergency - catflap fitting - how ??
>
>
> > Thanks Nigel
> >
> > At last some common sense, every glazier that we have spoken to
wants
> > to sell us a new window :-)
> >
> > I might as well try the DIY thing first.
> >
> > Nick.
> >
> >
> > > -----Original Message-----
> > > From: Nigel Orr [mailto:Nigel.Orr@xxxxxxx]
> > > Sent: 31 July 2000 09:09
> > > To: ukha_d@xxxxxxx
> > > Subject: Re: [ukha_d] OT: Emergency - catflap fitting - how
??
> > >
> > >
> > > At 14:47 27/07/00 +0100, you wrote:
> > > >Is it possible to cut a circular hole (210 mm diameter)
in a
> > > pane of glass
> > > >which is
> > > >already fitted into a fixed window ????
> > >
> > > Yes, as long as it's not double glazed.
> > >
> > > Either get a glazier to do it or get a DIY manual (Readers
Digest and
> > > Collins are both good and IIRC both have glass cutting
instructions) and
> > > DIY, with a glazier's number ot hand in case it goes
wrong...
> > >
> > > In summary, you score a circle with a glass cutter, then
> > > crisscross it with
> > > scores, and break out lots of small bits.
> > >
> > > Nigel
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>


--------------------------------------------------------------------<e-
Be in control!  Download Your Own NeoPlanet Browser Now!  Free!
http://click.egroups.com/1/7676/9/_/2065/_/965035958/
--------------------------------------------------------------------e>-





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.