The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Comfort vs HomeVision


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Heating Control


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Heating Control
  • From: "Michael Mc Aree" <michael.mcaree@xxxxxxx>
  • Date: Tue, 4 Jul 2000 08:27:00 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I have a the timer switched to 24 hours and the timings then controlled by
HomSeer using X10. I have a DS1820 monitoring temperature in the living
room. Ideally I will use this as my thermostat. All I need is to set limits
and have the X10 switch go on and off acording to the temp in the room. I
will also have 'on for an hour' and 'off for an hour' switches (X10 and
Pronto) because I couldn't rely on a temperature probe all the time,
sometimes you just *feel* too hot/cold.

Michael
BELFAST

-----Original Message-----
From: Steve Gordon [mailto:steve.gordonsolutions@xxxxxxx]
Sent: 03 July 2000 18:15
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Heating Control


Michael,

How are you controlling the heating? Are you using an X-10 thermostat
device
to control the temperature setting and an appliance module to control the
timing of the boiler? Or have you got a more complicated control set-up.
This sounds like what I would like to do but have not had time to look at
the thermostats/controllers available.

TIA

Steve

-----Original Message-----
From: M McAree Jr [mailto:michael.mcaree@xxxxxxx]
Sent: 03 July 2000 11:28
To: ukha_d@xxxxxxx
Subject: [ukha_d] Heating Control


I now have my heating wired to an appliance module. I have X10 control of
the heating through my Pronto remote and also HomeSeer timings. I want to
install an SS13E switch beside the existing timer to give a greater level
of
control. I plantg to use HomeSeer Macros with the switch so therefore I
have
6 possible actions. I expect I will use ON and OFF for the first two but I
would like a BOOST button of some kind. Does anyone have any experience of
this using HomeSeer? Any ideas for the other buttons/macros ?

Michael
BELFAST


------------------------------------------------------------------------
Lonely? Get Firetalk!
Free, unlimited calls anywhere in the world.
Free voice chat on hundreds of topics.
http://click.egroups.com/1/5477/9/_/2065/_/962620067/
------------------------------------------------------------------------




------------------------------------------------------------------------
Free Conference Calling with Firetalk!
Host your next egroup meeting live on Firetalk.
Click here!
http://click.egroups.com/1/5478/9/_/2065/_/962644318/
------------------------------------------------------------------------


------------------------------------------------------------------------
Win $5000! Click Here:
http://click.egroups.com/1/5941/9/_/2065/_/962695631/
------------------------------------------------------------------------




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.